Installation Hardware & Accessories Product Category - Sensorex Liquid Analysis Technology

Sensor cartridge housing for use with S8000 series pH and ORP electrodes. Available with integrated automatic temperature compensation and solution ground. Reduce operating costs of pH sensors by using the modular S8000 platform – only the sensor cartridge must be replaced. For use in submersion or in-line installations. Modular design lowers overall pH sensor cost Easy installation Solution ground available for eliminating measurement errors caused by reference ground potentials Compatible with all Sensorex S8000 Series pH and ORP sensor cartridges One year limited warranty

The Calibration Box (PN# CALBOX – MB) is used to calibrate modbus sensors. The wires from the sensors connect to the terminal block on the front of the box. It connects to a computer via a USB interface. This product is to be used with only the integrated version of our Smart Sensors, which include: S272 pH & ORP sensors DO6400 Series sensors TCS3020 sensor FCL & CLD amperometric sensors The Calibration Box is not measurement specific. One of these can be used to calibrate all integrated sensors.

$ 11.75

The S853 and S855 are shielded, low-noise cable assemblies for our S8000 series pH and ORP sensors. The cable assembly features a 3/4″ NPT thread submersion installations. The S853 is for use with sensors without automatic temperature compensation. The S855 is for use with sensors with automatic temperature compensation. The S856 is for use with conductivity sensors.

Ensure noise free signals with these high quality cables.

The Calibration Adapter (PN# S857) is used to calibrate modbus sensors. It threads on to the back of the smart sensor and it connects to a computer via a USB interface. This product is to be used with only the modular version of our Smart Sensors, which include: S8000 Series pH and ORP Sensors CS8000 Series Conductivity Sensors The Calibration Adapter is not measurement specific. One of these can be used to calibrate all modular sensors.

Turn any 12mm probe into an insertion probe. Our FC75C Flow Cell Kit is an easy and economical means for mounting pH sensors for in-line applications.  Compatible with all 12mm electrodes, including S222CD Light-Duty Online Process pH Sensor . To only purchase the gland, please purchase the FC75P    

The FC875/T Threaded 3/4″ CPVC Flow Cell is used for in-line installation of the S8000CD Self-Cleaning Industrial pH Sensor or S8000CD-ORP Self-Cleaning Industrial ORP Sensor. The FC800 is used with Sensorex CS300 Process Graphite Contacting Conductivity Sensor with 0.1 cell constant. The FC875/T is part of a complete S8000 package and can be purchased separately, or it is already included in our S8000 Kits listed below: S8300 Self-Cleaning In-Line Process pH Sensor S8200 ORP Self-Cleaning In-Line Process ORP Sensor

Our BV-1 full port 1” ball valve is designed for use with our S675 Series Wet Tap Insertion Assemblies  and S656CD pH Sensors . The BV1 mounts a pH sensor in pressurized lines or the sidewall of tanks. Sensors can be retracted for service without shutting down lines or the need to empty tanks. Constructed of durable CPVC. Remove sensors for cleaning and maintenance without system shutdown Full 1″ port design is compatible with Sensorex insertion assemblies and sensors One year limited warranty

Users installing into large tanks, large process lines and scrubber lines will appreciate this hot tap assembly to simplify installation. Adjustable insertion depth up to 12” ensures sensor is in flow for best results. Designed in CPVC for a user friendly cost compared to expensive stainless models, the S675 assembly is well suited for most water and wastewater treatment applications. Incorporates optional automatic temperature compensation (ATC) with 1000Ω RTD. Supplied with 10 foot cable. Designed for use with our S656CD Flat Surface pH Cartridge and BV-1 Ball Valve to facilitate removal from system without need for shutdown. Durable CPVC design is suitable for most applications Remove sensors for cleaning and maintenance without system shutdown Easy installation One year limited wa

$ 341.21 – $ 570.12 Price range: $341.21 through $570.12

Our FC72 flow cell facilitates high-accuracy measurements of free chlorine and chlorine dioxide by preventing air bubble formation on the sensor membrane while maintaining laminar flow across the membrane. Compatible with FCL Series Free Chlorine Sensors and CLD Series Chlorine Dioxide Sensors . Facilitates high-accuracy measurements Simple Sensor Installation For use with Sensorex FCL Series Free Chlorine and CLD Series Chlorine Dioxide Sensors One year limited warranty

The Sensorex ES100 holds electrode steady, right where you want them. Flex arm lets you lift and lower, rotate and lock in position effortlessly.

When chemicals from challenging applications get inside the sensor reference, chemical reactions can create insoluble salts. These salts clog the reference junction and interrupt the electrical circuit, leading to drifting measurements. Fortunately, our differential pH and ORP sensors can be maintained with the SDS replaceable reference junctions (salt bridges). Simply remove the old salt bridge and insert a new one to restore normal performance to a clogged sensor. Replaceable reference junction for extending the lifetime of SD7000, SD7420, SD7500 sensors Direct-fit compatibility for several popular Hach & Water Analytics models One year limited warranty with the Sensorex Guarantee *Hach is a registered trademark of Danaher. Water Analytics is a registered trademark of Water Analytics

The PHAMP-1 is a battery-powered unity-gain preamplifier that allows the user to run cables up to 1000 feet between the electrode and pH or ORP controller, transmitter, or meter. Simply plug in any pH or ORP electrode equipped with a BNC connector, plug in the extension cable and your system is ready for use. Extend pH or ORP electrode signals up to 1,000 feet Compatible with any pH/ORP electrode with a BNC connector Instantly ready for use