Français
Čeština
English GB
Italiano
Español
Deutsch
Polski
Pool Buffer Calibration Solution
An uncalibrated pool can be a costly mistake for your pool.
A poorly calibrated pool probe can indicate that the water is too acidic or too alkaline when it really isn't, causing you to run your regulator unnecessarily. If your pool is over-calibrated, it may appear cloudy or green, which can be very off-putting for swimmers. Worse still, the water will feel hard to the touch. This can also cause calcium scaling of surfaces and equipment, which can reduce the lifespan of the equipment.
We offer a range of pH and RedOX buffer solutions for pools that will allow you to calibrate this probe.
Calibration is the process of adjusting an instrument to better reflect its actual position. Pool probes should always be calibrated to ensure that your regulator operates as efficiently as possible.
Preservation of the pool's PH probe during storage
How to store your pool's PH sensor for the winter. Pool water containing chlorine (and other disinfectants) tends to corrode metals in ordinary pH probes very quickly. Many measures can be taken to extend the life of the probe. Immerse your probe in a probe winterizing solution, make sure it is immersed in a winterizing solution. This will ensure that the probe can be put back into service without any worries.
Practical Guide for the Maintenance and Calibration of Pool Probes
PH4-pH7 calibration kit
- PH 7 calibration / calibration solution for probes
50 ml
- PH 4 calibration / calibration solution for probes
50 ml
- Cap for probe calibration
for pH and chlorine regulator.
12 mm diameter probe input
tightness up to 12 bars
€24
PH4-pH7 calibration and winterization kit
- PH RedOx wintering solution for probes
50 ml
- PH7 RedOx solution for probes
50 ml
- PH4 RedOx solution for probes
50 ml
- Cap for probe calibration
for pH and chlorine regulator.
12 mm diameter probe input
tightness up to 12 bars
€35
PH7 calibration and winterization kit
- PH RedOx wintering solution for probes
50 ml
- PH7 RedOx solution for probes
50 ml
- Cap for probe calibration
for pH and chlorine regulator.
12 mm diameter probe inlet
tightness up to 12 bars
€25
RedOX calibration kit 475 mV
- RedOX calibration / calibration solution 475 mV for probes
50 ml
- Cap for probe calibration
for pH and chlorine regulator.
12 mm diameter probe input
tightness up to 12 bars
€14
PH7-PH10 calibration kit
- PH 7 calibration / calibration solution for probes
50 ml
- PH 10 calibration / calibration solution for probes
50 ml
- Cap for probe calibration
for pH and chlorine regulator.
12 mm diameter probe input
tightness up to 12 bars
€24
PH / RedOX wintering kit
- PH RedOx winter storage solution for probes
50 ml
- Cap for probe calibration
for pH and chlorine regulator.
12 mm diameter probe input
tightness up to 12 bars
€16