Reference: PS-0615
Brand: Sonde pH redOx
Ph10 buffer calibration solution
PH10 buffer solution for probes 50 ml
50 ml
50 ml
50 ml
for pH and chlorine regulator.
12 mm diameter probe inlet
tightness up to 12 bars
For all order over €54.00
Secure card payment
Made in europe
Experts at your service
Our engagement
In the world of swimming pools, when we speak of a “ swimming pool buffer solution ”, it is because we have a very specific objective in mind: to calibrate our swimming pool sensor.
Indeed, when you want to measure the salt level, the bromine level, the chlorine level or even the pH of the water with electronic testers (pH meter, pH regulator, chlorine regulator, etc.) from probe to electrode, for the measurements to be fair and precise, it is essential to calibrate the probe when the device is put into service, and when the pool is put back into service in the spring.
And to calibrate the probe effectively, it must be immersed in a reference solution, also called a standard solution , or buffer solution ; this maneuver will allow the probe to fix the reference value on which it will always have to be based to evaluate the levels of a particular product in the water.
When calibrating a swimming pool sensor performed on a new device, it is always necessary to start by letting the electrode sit all day in the specific storage solution that was delivered with the electronic tester.
Then, it suffices to soak the probe in the appropriate buffer solution (buffer solution pH7, 4 and 9 or 10 for the pH probes, Redox buffer solution for the redox chlorine probes, etc.), wait for the result to be read. stabilizes, and adjust the device as needed.
Note: depending on the nature of our measuring device (simple analysis device or analysis and regulation device) and the results that will be displayed on the box, the progress of the calibration operation may switch.
It is therefore imperative to refer to the instructions for use of our device.
To correctly calibrate a swimming pool probe, you need: a swimming pool probe, and ... a swimming pool buffer solution which will allow this probe to be calibrated!
In the world of swimming pools, when we speak of a “ swimming pool buffer solution ”, it is because we have a very specific objective in mind: to calibrate our swimming pool sensor.
Indeed, when you want to measure the salt level, the bromine level, the chlorine level or even the pH of the water with electronic testers (pH meter, pH regulator, chlorine regulator, etc.) from probe to electrode, for the measurements to be fair and precise, it is essential to calibrate the probe when the device is put into service, and when the pool is put back into service in the spring.
And to calibrate the probe effectively, it must be immersed in a reference solution, also called a standard solution , or buffer solution ; this maneuver will allow the probe to fix the reference value on which it will always have to be based to evaluate the levels of a particular product in the water.
When calibrating a swimming pool sensor performed on a new device, it is always necessary to start by letting the electrode sit all day in the specific storage solution that was delivered with the electronic tester.
Then, it suffices to soak the probe in the appropriate buffer solution (buffer solution pH7, 4 and 9 or 10 for the pH probes, Redox buffer solution for the redox chlorine probes, etc.), wait for the result to be read. stabilizes, and adjust the device as needed.
Note: depending on the nature of our measuring device (simple analysis device or analysis and regulation device) and the results that will be displayed on the box, the progress of the calibration operation may switch.
It is therefore imperative to refer to the instructions for use of our device.
Reference: PS-0615
Brand: Sonde pH redOx
PH10 buffer solution for probes 50 ml
Reference: PS-0616
Brand: Sonde pH redOx
PH9 buffer solution for probes 50 ml
Reference: PS-0617
Brand: Sonde pH redOx
PH7 buffer solution for probes 50 ml
Reference: PS-0619
Brand: Sonde pH redOx
PH4 buffer solution for probes 50 ml
Reference: PS-0620
Brand: Sonde pH redOx
650mV buffer solution for probes 50 ml
Reference: PS-0621
Brand: Sonde pH redOx
475mV buffer solution for probes 50 ml
Reference: PS-0622
Brand: Sonde pH redOx
wintering solution for pH RedOx probe 50 ml
Reference: PS-1637
Brand: Sonde pH redOx
Probe holder for pH and chlorine regulator. Standard 1/2 'thread for mounting on support collar. 12 mm diameter probe input tightness up to 12 bars
Reference: PS-0621
Brand: Sonde pH redOx
475mV buffer solution for probes 50 ml
Reference: PS-0617
Brand: Sonde pH redOx
PH7 buffer solution for probes 50 ml
Reference: PS-2944
Brand: Sonde pH redOx
RedOX calibration / calibration solution 200 mV for probes 50 ml Cap for probe calibration for pH and chlorine regulator. 12 mm diameter probe inlet tightness up to 12 bars
Reference: PS-1911
Brand: Sonde pH redOx
PH7,5 buffer solution for probes 50 ml
Reference: PS-1652
Brand: Sonde pH redOx
PH RedOx wintering solution for probes 50 ml RedOx solution 468mV 470mV 475mV for the probes 50 ml Cap for probe calibration for pH and chlorine regulator. 12 mm diameter probe inlet tightness up to 12 bars
Reference: PS-2850
Brand: Sonde pH redOx
RedOX calibration / calibration solution 468mV for probes 50 ml Cap for probe calibration for pH and chlorine regulator. 12 mm diameter probe inlet tightness up to 12 bars
Reference: PS-1648
Brand: Sonde pH redOx
PH RedOx wintering solution for probes 50 ml PH7 RedOx solution for probes 50 ml PH9 RedOx solution for probes 50 ml Cap for probe calibrationfor pH and chlorine regulator. 12 mm diameter probe input tightness up to 12 bars
Reference: PS-1642
Brand: Sonde pH redOx
PH 7 calibration / calibration solution for probes 50 ml PH 10 calibration / calibration solution for probes 50 ml Cap for probe calibration for pH and chlorine regulator. 12 mm diameter probe input tightness up to 12 bars
Reference: PS-2854
Brand: Sonde pH redOx
PH RedOx wintering solution for probes 50 ml RedOx solution 465mV for the probes 50 ml Cap for probe calibration for pH and chlorine regulator. 12 mm diameter probe inlet tightness up to 12 bars
Reference: PS-1643
Brand: Sonde pH redOx
PH 7 calibration / calibration solution for probes 50 ml Cap for probe calibration for pH and chlorine regulator. 12 mm diameter probe input tightness up to 12 bars
Reference: PS-1646
Brand: Sonde pH redOx
PH RedOx winter storage solution for probes 50 ml Cap for probe calibration for pH and chlorine regulator. 12 mm diameter probe input tightness up to 12 bars
Reference: PS-0620
Brand: Sonde pH redOx
650mV buffer solution for probes 50 ml
Reference: PS-2903
Brand: Sonde pH redOx
PH RedOx wintering solution for probes 50 ml PH7,5 RedOx solution for probes 50 ml Cap for probe calibration for pH and chlorine regulator. 12 mm diameter probe inlet tightness up to 12 bars
Reference: PS-0619
Brand: Sonde pH redOx
PH4 buffer solution for probes 50 ml
Reference: PS-2840
Brand: Sonde pH redOx
PH RedOx wintering solution for probes 50 ml 700 mV RedOx solution for probes 50 ml Cap for probe calibration for pH and chlorine regulator. 12 mm diameter probe inlet tightness up to 12 bars
Reference: PS-2841
Brand: Sonde pH redOx
700 mV buffer solution for probes 50 ml