ODO8000 and ODO9000 - Lumin-S Optical Dissolved Oxygen Sensors with Digital Communication
   

ODO8000 and ODO9000 - Lumin-S Optical Dissolved Oxygen Sensors with Digital Communication

ODO8000 + ODOA81
The Lumin-S optical dissolved oxygen sensor delivers reliable DO measurements over a long operating life. There are no membranes to replace, no electrolyte solutions to replenish, and no anodes to clean. Maintaining the sensor is as easy as replacing the optical sensing cap once every 1-2 years, and since all calibration data is stored on the cap, there’s no need to calibrate. This dissolved oxygen sensor outputs a Modbus/RS-485 digital signal for easy PLC integration. Available with Stainless Steel or Titanium body Reliable measurements: Optical sensor technology delivers accurate DO monitoring with no drift and no minimum flow Long operating life with minimal maintenance:  No membranes, electrolyte solutions, or anodes – just replace the cap once every 1-2 years No calibration: All
Body Material : 316-stainless-steel
En rupture de stock
55 900 Kč
TTC
Quantité

Rupture de stock

The Lumin-S optical dissolved oxygen sensor delivers reliable DO measurements over a long operating life. There are no membranes to replace, no electrolyte solutions to replenish, and no anodes to clean. Maintaining the sensor is as easy as replacing the optical sensing cap once every 1-2 years, and since all calibration data is stored on the cap, there’s no need to calibrate. This dissolved oxygen sensor outputs a Modbus/RS-485 digital signal for easy PLC integration.

  • Reliable measurements: Optical sensor technology delivers accurate DO monitoring with no drift and no minimum flow
  • Long operating life with minimal maintenance: No membranes, electrolyte solutions, or anodes – just replace the cap once every 1-2 years
  • No calibration: All calibration data is stored on the cap for quick and easy startup
  • Simple system integration: Use Modbus/RS-485 to integrate with a PLC or other control system
  • One year limited warranty: We stand behind all our products with the Sensorex Guarantee

CA ResidentsProp 65 WARNING(S)



  • Measurement Range: 0-200%, 0.00-20.00 mg/L, 0.00-20.00 ppm dissolved oxygen

    Temperature Range: 0-50⁰C

    Body Construction: 

    ODO8000: Stainless Steel 316L

    ODO9000:  Titanium

    Power Requirement: 12V

    Mounting Hardware: optional 1″ NPT for connecting conduit – part number ODOA81 (order separately)

    Cable Length: 10 meters (33 feet)

    Warranty: One year limited warranty



Weight1.68 lbs
Dimensions10.75 × 4.4 × 3.4 in
Cable Length10 mt (33 ft)

The Lumin-S optical dissolved oxygen sensor delivers reliable DO measurements over a long operating life. There are no membranes to replace, no electrolyte solutions to replenish, and no anodes to clean. Maintaining the sensor is as easy as replacing the optical sensing cap once every 1-2 years, and since all calibration data is stored on the cap, there’s no need to calibrate. This dissolved oxygen sensor outputs a Modbus/RS-485 digital signal for easy PLC integration.

Available with Stainless Steel or Titanium body

  • Reliable measurements: Optical sensor technology delivers accurate DO monitoring with no drift and no minimum flow
  • Long operating life with minimal maintenance: No membranes, electrolyte solutions, or anodes – just replace the cap once every 1-2 years
  • No calibration: All calibration data is stored on the cap for quick and easy startup
  • Simple system integration: Use Modbus/RS-485 to integrate with a PLC or other control system
  • One year limited warranty: We stand behind all our products with the Sensorex Guarantee
: ODO8000 + ODOA81
En rupture de stock

Fiche technique

Dimensions
10.75 x 4.4 x 3.4 in
Applications
Dissolved Oxygen, Industrial Water and Wastewater Treatment, Municipal Water and Wastewater Treatment, Online Sensors, Smart Sensors
Measurement Range
0-200%, 0.00-20.00 mg/L, 0.00-20.00 ppm dissolved oxygen
Warranty
One year limited warranty
ODO8000
Stainless Steel 316L
ODO9000
Titanium
Power Requirement
12V
Mounting Hardware
optional 1″ NPT for connecting conduit - part number ODOA81 (order separately)
Longueur de câble
10 meters (33 feet)
10 mt (33 ft)
Temperature Range
0-50⁰C
Poids
1.68 lbs