Categorie
TX20 - pH and ORP Controller

TX20 - pH and ORP Controller

TX20
Our TX20 Automatic pH Controller is a convenient and cost effective solution for monitoring and maintaining both pH and ORP. This controller allows you to save space in your panel with its small footprint 1/8 DIN case. You can also use the two on/off relay outputs to program process control, including management of alarms and chemical dosage systems. Easy to install 1/8 DIN Case Two on/off controls (relay outputs) Compatible with sensors that utilize spade lug connectors Clear LCD displays pH or ORP and temperature 100-240 VAC power supply Note: The TX20 Automatic pH Controller is only compatible with sensors that have spade lug connectors.
Esaurito
24.859 Kč
Tasse incluse
Quantità

Non disponibile

Our TX20 Automatic pH Controller is a convenient and cost effective solution for monitoring and maintaining  pH and ORP. This controller allows you to save space in your panel with its small footprint 1/8 DIN case. You can also use the two on/off relay outputs to program process control, including management of alarms and chemical dosage systems.

  • Easy to install 1/8 DIN Case
  • Two on/off controls (relay outputs)
  • Compatible with sensors that utilize spade lug connectors
  • Clear LCD displays pH or ORP and temperature
  • 100-240 VAC power supply

Note: The TX20 Automatic pH Controller is only compatible with sensors that have spade lug connectors.

CA Residents: Prop 65 WARNING(S)

Read More


  • Measurement Range (pH): -2.00 to 16.00pH, 0.01 pH resolution, +/- 0.1% accuracy

    Measurement Range (ORP/mV): -1999mV to 1999mV, 1mV resolution, +/- 0.1% accuracy

    Temperature Range: -10 °C to 120 °C , 0.1 °C resolution, +/- 0.3 °C accuracy

    Control Type/Relay Output: 2 ON/OFF controls / 5A at 115VC AC or 2.5A at 220V AC, resistive load only

    Enclosure: 1/8 DIN (3.78″ L x 3.54″ W x 1.89″ H)

    Ambient Operating Temperature: 0° C to 50° C

    Temperature Compensation: Auto/Manual (-10 °C to 120 °C)

    Power Requirement: 100-240 VAC, max 500 ohm load

    Weight: 290g


Instructions TX20
DOWNLOAD
TX10-TX20 Specifications
DOWNLOAD

Weight0.61 lbs
Dimensions3.78 × 3.54 × 1.89 in
ParameterORP, pH

Our TX20 Automatic pH Controller is a convenient and cost effective solution for monitoring and maintaining both pH and ORP. This controller allows you to save space in your panel with its small footprint 1/8 DIN case. You can also use the two on/off relay outputs to program process control, including management of alarms and chemical dosage systems.

  • Easy to install 1/8 DIN Case
  • Two on/off controls (relay outputs)
  • Compatible with sensors that utilize spade lug connectors
  • Clear LCD displays pH or ORP and temperature
  • 100-240 VAC power supply

Note: The TX20 Automatic pH Controller is only compatible with sensors that have spade lug connectors.

: TX20
Esaurito

Scheda tecnica

Power Requirement
100-240 VAC, max 500 ohm load
Measurement Range (pH)
-2.00 to 16.00pH, 0.01 pH resolution, +/- 0.1% accuracy
Measurement Range (ORP/mV)
-1999mV to 1999mV, 1mV resolution, +/- 0.1% accuracy
Enclosure
1/8 DIN (3.78″ L x 3.54″ W x 1.89″ H)
Ambient Operating Temperature
0° C to 50° C
Control Type/Relay Output
2 ON/OFF controls / 5A at 115VC AC or 2.5A at 220V AC, resistive load only
Dimensions
3.78 x 3.54 x 1.89 in
Applications
Controllers & Transmitters, ORP, pH
Parameter
ORP, pH
Temperature Range
-10 °C to 120 °C , 0.1 °C resolution, +/- 0.3 °C accuracy
Temperature Compensation
Auto/Manual (-10 °C to 120 °C)
Peso
0.61 lbs
290g