Categorie
LPM100 - Display, alimentato dall'anello di corrente 4-20mA

LPM100 - Display alimentato dal loop 4-20 mA

LPM100
LPM100 è un display robusto, alimentato dal loop 4-20 mA, progettato per il monitoraggio di processo. Compatibile con i sensori Sensorex 4-20 mA per parametri come trasmittanza UV, cloro libero e ossigeno disciolto; montaggio versatile e installazione semplice, con interfaccia intuitiva e garanzia limitata di un anno.
Sbrigatevi! 100 ancora articoli in magazzino.
1.240 €
Tasse incluse
Quantità

The LPM100 is a durable, loop-powered 4-20mA display for use in process monitoring applications. Compatible with any sensor with a 4-20mA output, the LPM100 can display readings for various parameters, including UV transmittance, free chlorine, dissolved oxygen, chlorine dioxide, and more. The LPM100 can be mounted in various configurations – including pipe mounting with our pipe mount kit – and endure harsh environmental conditions. Simple installation and operation make it an ideal solution for process read out monitoring.

  • Compatible with a wide variety of sensors: For use with Sensorex sensors with a 4-20mA output
  • Superior durability for demanding applications: Plastic NEMA 4X and IP65 field mountable enclosure
  • User-friendly interface: Large, sleek 3 ½ digit display and increased visibility with loop powered back-light
  • Simple installation and operation: Programmable using front-mounted control dials
  • Versatile mounting options: Display may be mounted at 90° increments up to 270° from default orientation
  • One year limited warranty: We stand behind all our products with the Sensorex Guarantee

CA Residents: Prop 65 WARNING(S)

Read More


  • Input: 4-20 mA
    Accuracy: ±0.1% of full span ±1 count
    Display: 3½ digit LCD, 1″ (25.4 mm), -1,999 to 1,999
    Display Update Rate: 2.5 Updates/Second
    Display Orientation: Display may be mounted at 90° increments up to 270° from default orientation
    Over-range: Display reads 1 on the left most digit
    Operating and Storage Temperature Range: -40 to 75°C
    Relative Humidity: 0 to 90% non-condensing
    Connections: Screw terminals accept 12 to 22 AWG wire
    Enclosure: NEMA 4X, IP65 plastic field enclosure
    Dimensions: 5.67″ x 5.25″ x 4.18″ (144 mm x 133 mm x 106 mm) (W x H x D)
    Weight: 1.65 lbs (26.4 oz, .75 kg)
    Temperature Drift: 150 PPM/°C from -40 to 75°C ambient
    Calibration Range: 4 mA input: -1000 to +1000; 20 mA between 20 and 2000 counts greater than 4 mA display. Two point linear display span
    Maximum Voltage Drop: 4 VDC @ 20 mA with loop-powered back-light
    Input Overload: Over current protection to 2 A max


Instructions LPM100
DOWNLOAD
LPM100 Specifications
DOWNLOAD

Weight0.17 lbs
Dimensions4 × 5 × 1 in
ParameterChlorine Dioxide, Conductivity, Dissolved Oxygen, Free Chlorine, ORP, pH, UVT

The LPM100 is a durable, loop-powered 4-20mA display for use in process monitoring applications. Monitor various parameters, including UV transmittance, free chlorine, dissolved oxygen, and more. This large display meter can be mounted in various configurations – including pipe mounting with our pipe mount kit. Simple installation and operation make it an ideal solution for process read out monitoring.

  • Compatible with Sensorex 4-20mA output sensors
  • Durable for harsh environmental conditions
  • Simple set up and operation
  • User-friendly interface
  • One year limited warranty
: LPM100
: 100 Articoli
Sbrigatevi! 100 ancora articoli in magazzino.

Scheda tecnica

Ingresso
4-20 mA
Deriva di temperatura
150 PPM/°C a temperatura ambiente da -40 a 75 °C
Orientamento schermo
Il display può essere montato con incrementi di 90° fino a 270° rispetto all'orientamento predefinito
Fuori scala
Il display mostra 1 sulla cifra più a sinistra
Intervallo di temperature di esercizio e di stoccaggio
-40 a 75°C
Umidità relativa
0-90 % senza condensa
Connessioni
I morsetti a vite accettano fili AWG da 12 a 22
Intervallo di calibrazione
4 m
Ingresso A
-1000 a +1000; 20 mA tra 20 e 2000 counts, visualizzazione per valori superiori a 4 mA. Campo di visualizzazione lineare a due punti
Dimensioni
4 x 5 x 1 in
5.67″ x 5.25″ x 4.18″ (144 mm x 133 mm x 106 mm) (L x A x P)
Caduta di tensione massima
4 VDC a 20 mA con retroilluminazione alimentata dal loop
Sovraccarico di ingresso
Protezione da sovracorrente fino a 2 A
Applicazioni
Cloro, Conduttività, Regolatori e trasmettitori, Ossigeno disciolto, ORP, pH, Trasmittanza UV
Precisione
±0,1% della piena scala ±1 unità
Involucro
NEMA 4X, IP65 involucro da campo in plastica
Schermo
LCD 3½ cifre, 1″ (25.4 mm), -1,999 a 1,999
Frequenza di aggiornamento del display
2.5 aggiornamenti al secondo
Parametro
Diossido di cloro, Conducibilità, Ossigeno disciolto, Cloro libero, ORP, pH, UVT
Peso
0.17 lbs
1.65 lbs (26.4 oz, .75 kg)